Ultra-Low EMF Mica Infrared Sauna Heating Panel Package – 7 Heater Panels 2100W
Ultra-Low EMF Mica Infrared Sauna Heating Panel Package – 7 Heater Panels 2100W
2-Year Warranty
Technical Support
Guaranteed Compatibility
Не удалось загрузить сведения о доступности самовывоза
2100W Ultra-Low EMF Mica Infrared Sauna Heating Panel Kit – 7 Panels
Upgrade, repair, or build your own infrared sauna with our 2100W Ultra-Low EMF Mica Infrared Sauna Heating Panel Kit. Featuring seven 300W mica infrared heating panels, this kit delivers a combined 2100W of rated heating power and is designed to provide consistent far infrared warmth with low electromagnetic field (EMF) emissions.
Designed for sauna spaces up to approximately 110 cu. ft., this heating system is suitable for DIY infrared sauna construction, sauna repair, and heating system upgrades. Under suitable conditions, sauna temperatures may reach approximately 149°F (65°C). Actual results depend on room insulation, ambient temperature, ventilation, and installation design.
Each heating panel comes with a pre-attached 10 ft (3.0 m) C14 connector cable, allowing convenient plug-and-play connections with compatible Sauna Parts World control systems.
This package includes seven infrared heating panels only. A compatible sauna controller is required.
SHOP SAUNA CONTROLLERS →Product Overview
This 2100W infrared sauna heating kit includes seven mica infrared heating panels, each rated at 300W. The panels are designed to deliver comfortable, consistent far infrared warmth throughout your sauna while maintaining low electromagnetic field emissions.
With an ultra-low EMF design, ETL Listed heating panels, and pre-attached C13 connector cables, this kit provides a convenient solution for customers building new infrared saunas or replacing existing heating components.
- 7 mica infrared heating panels
- Includes a heat-insulating frame made from hemlock wood
- 300W per panel – 2100W total rated power
- Ultra-Low EMF heating technology
- ETL Listed heating panels
- Recommended for sauna spaces up to 110 cu. ft.
- Potential maximum temperature of 149°F / 65°C
- 10 ft C14 connector cable with each panel
- Compatible with appropriately rated Sauna Parts World controllers
- Convenient plug-and-play style installation
- Ideal for DIY infrared sauna construction and repairs
Package Includes
| Mica Infrared Heating Panels | 7 pcs |
| Power per Panel | 300W |
| Total Rated Heating Power | 2100W |
| Power Cables | 7 pre-attached C14 connector cables |
| Cable Length | 10 ft / approximately 3.0 m each |
| Sauna Controller | Not included |
Product Specifications
| Product Type | Infrared Sauna Heating Panel Kit |
| Heating Technology | Mica Far Infrared Heating Panels |
| Panel Quantity | 7 Panels |
| Individual Panel Power | 300W |
| Total Rated Power | 2100W |
| EMF Design | Ultra-Low EMF |
| EMF Test Result at 0 cm | 4.44 mG |
| EMF Test Result at 2 cm | 3.81 mG |
| EMF Test Result at 10 cm | 3.03 mG |
| Safety Listing | ETL Listed Heating Panels |
| Recommended Sauna Volume | Up to approximately 110 cu. ft. / 3.12 m³ |
| Potential Maximum Sauna Temperature | Approximately 149°F / 65°C |
| Connector Type | C14 Connector |
| Cable Length | 10 ft / 3.0 m per panel |
| Controller Compatibility | Sauna Parts World control systems with suitable voltage, output capacity, and connector configuration |
| Installation Type | DIY-Friendly Plug-and-Play Design |
| Controller Included | No |
Ultra-Low EMF Performance & Test Results
Ultra-Low Electromagnetic Field Emissions
Our mica infrared heating panels are designed to maintain low electromagnetic field emissions during normal operation.
The supplied EMF test report records magnetic field measurements at different distances from the front surface of the heating panel.
| Measurement | Result |
| Front Surface – 0 cm | 4.44 mG |
| Front Surface – 2 cm | 3.81 mG |
| Front Surface – 10 cm | 3.03 mG |
| Background Magnetic Field | 2.04 mG |
| Test Input Voltage | 120V |
| Operating Condition | Normal |
EMF Test Report
The following test report shows the recorded electromagnetic field measurements for the heating panel.
Test Note: Results reflect the specific sample and conditions shown in the supplied test report. The background magnetic field was 2.04 mG. Measurements are reported as recorded, without subtracting background levels. Actual EMF measurements may vary depending on installation, operating conditions, and surrounding electrical equipment.
ETL Listed Heating Panels
ETL Listed Heating Panels
The mica infrared heating panels are specified as ETL Listed, providing an additional point of reference for customers selecting heating components for their infrared sauna projects.
For safe operation, always use properly rated electrical components and follow the applicable installation instructions and electrical codes.
Key Features
2100W Total Heating Power
Seven 300W infrared heating panels provide a combined rated heating power of 2100W. The multi-panel configuration allows heat to be distributed across different sections of an infrared sauna for more consistent heat coverage.
Ultra-Low EMF Design
Designed for low electromagnetic field emissions, with a reported magnetic field measurement of 3.03 mG at a distance of 10 cm from the front surface.
Mica Infrared Heating Technology
Mica-based infrared heating panels provide comfortable far infrared warmth and are suitable for compatible infrared sauna heating systems.
ETL Listed Heating Panels
The included mica heating panels are specified as ETL Listed, offering customers a listed heating component option for compatible sauna installations.
Plug-and-Play C14 Connections
Each heating panel comes with its own pre-attached 10 ft C13 connector cable. Compatible connections can be made without manually splicing individual heater wires, helping simplify installation.
DIY-Friendly Installation
The connector-based design makes heater replacement and installation more convenient for customers with basic DIY skills. Main power wiring and circuit modifications must still comply with applicable electrical safety requirements.
Compatible With Our Control Systems
These heating panels are designed for use with compatible Sauna Parts World control systems. Select a controller with the correct voltage, sufficient total power capacity, and compatible heating outputs.
SHOP SAUNA CONTROLLERS →Recommended Sauna Room Size
This infrared heating panel kit is recommended for properly insulated sauna spaces up to approximately 110 cubic feet.
| Recommended Maximum Volume | 110 cu. ft. |
| Metric Volume | Approximately 3.12 m³ |
| Potential Maximum Temperature | 149°F / 65°C |
| Total Rated Heating Power | 2100W |
Performance Note: Actual heating performance depends on sauna construction, insulation, ventilation, ambient temperature, panel placement, and installation conditions. 149°F (65°C) is an estimated achievable temperature under suitable conditions, not a guaranteed result for every sauna.
Power Requirements
The seven heating panels have a combined rated power of 2100W. A dedicated 20A circuit may be suitable depending on the rated supply voltage, continuous-load requirements, equipment specifications, and applicable electrical codes.
| Total Rated Power | 2100W |
| Calculated Current at 120V | Approximately 17.5A |
| Calculated Current at 240V | Approximately 8.75A for a 240V-rated configuration |
| Recommended Circuit | Dedicated 20A circuit |
| Controller | Required |
The supply circuit must be properly sized for the actual load and applicable code.
Only operate the panels at their specified rated voltage. Do not connect 120V-rated heating panels directly to a 240V supply.
A qualified electrician should verify circuit capacity, wiring, controller ratings, breaker sizing, and connection compatibility before installation.
Installation Instructions & Notes
Designed for Convenient DIY Installation
Each mica infrared heating panel comes with a pre-attached 10 ft C14 connector cable, reducing the need for complicated heater wiring.
- Plan the locations of all seven heating panels inside your infrared sauna.
- Install the heating panels according to the applicable mounting instructions and clearance requirements.
- Route the pre-attached C14 connector cables to the compatible sauna power control box.
- Connect the cables to suitable controller outputs, observing their individual and combined electrical ratings.
- Verify all connections and electrical requirements before operating the system.
A compatible sauna control system is required and must be purchased separately.
The plug-and-play C14 connections simplify heater installation, but proper electrical planning, cable routing, connector ratings, and controller compatibility must still be verified.
Disconnect the power supply before installation or maintenance.
Recommended Applications
- DIY infrared sauna room construction
- Infrared sauna heating panel replacement
- Home sauna repair projects
- Infrared sauna heating system upgrades
- Custom infrared sauna builds
- Replacement of compatible older heating panels
- Sauna projects requiring multiple heating zones
- Small and medium-sized infrared sauna rooms
Frequently Asked Questions (FAQ)
1. How many heating panels are included?
This kit includes seven mica infrared heating panels, each rated at 300W, providing a combined rated power of 2100W.
2. Is a sauna controller included?
No. The sauna controller must be purchased separately. A compatible controller is required to operate the heating panels.
3. Are these panels compatible with Sauna Parts World controllers?
Yes. They are designed for use with our compatible sauna control systems. The selected controller must support the panel voltage, total power, and required connector configuration.
4. What size sauna room can this kit heat?
We recommend sauna rooms up to approximately 110 cu. ft. with suitable insulation, construction, and panel placement.
5. Can the sauna reach 149°F?
Under suitable installation conditions, a sauna equipped with this kit may reach approximately 149°F (65°C). Actual results depend on room size, insulation, ventilation, ambient temperature, and other installation factors.
6. What are the EMF test results?
The supplied EMF test report shows 4.44 mG at 0 cm, 3.81 mG at 2 cm, and 3.03 mG at 10 cm from the front surface of the heating panel. The recorded background magnetic field was 2.04 mG.
7. Are the heating panels ETL Listed?
The included mica heating panels are specified as ETL Listed.
8. How long are the included cables?
Each heating panel includes a pre-attached 10 ft (approximately 3.0 m) C14 connector cable.
9. Is this kit suitable for DIY installation?
Yes. The pre-attached C14 connector cables simplify connections with compatible sauna control systems. However, electrical safety, proper mounting, circuit selection, and controller compatibility must still be verified.
10. Can I use a 120V 20A circuit?
YES, But a properly rated electrical configuration must be selected before installation. Consult a qualified electrician.
11. Do I need additional wiring?
Each heating panel includes its own 10 ft C14 connector cable. Additional electrical components or connections may be required depending on the selected controller and installation layout.
12. Can I replace my existing sauna heating panels?
Yes, provided the replacement panels are suitable for your sauna. Electrical specifications, mounting clearances, controller compatibility, and operating requirements must be verified before replacement.
